×
Quick Equipment Search
Equipment Fliter












used search tag

S220

Lawn Tractor with 42-in. Deck

  • 22 HP* Cyclonic V-Twin Engine
  • 42-in. (107-cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit
  • Comfortable 15-in (38-cm) open-back seat
  • Side-by-side forward and reverse pedals
  • 3-year/200-hour bumper-to-bumper warranty
Starting At:$2,999.00

Apply For Financing
View Product Brochure
https://www.deere.com/assets/publications/index.html?id=a537a9f8


Features



22-hp (16.4-kW) engine 22-hp (16.4-kW) engine
22-hp (16.4-kW) engine 22-hp (16.4-kW) engine

The 22-hp (16.4-kW) V-twin engine used in the S220 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

  • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
  • Large, 44.2-cu in. (724-cc) displacement
    • Plenty of torque helps to get the job done fast.
    • Large displacement engine increases the ability to get an even cut without mowing a second time.
    • Camshaft and carburetor designs create the optimum torque rise for rapid response to varying load conditions.
  • Electronic ignition for fast starts
  • Cast-iron sleeves for longer engine life
  • Overhead valves for excellent power and fuel economy
  • Full-pressure lubrication and oil filter for keeping the oil cleaner for a long engine life and extending the time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
  • Excellent serviceability with easily replaced air filter, fuel filter, and oil filter and a convenient oil-drain hose to make draining the oil easy and clean
Cyclonic air filter
Air filter cover Air filter cover
Air filter with foam precleaner Air filter with foam precleaner

Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:

  • Cyclonic design ejects large dirt particles before they make contact with the filter.
  • Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
  • The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.
Serviceability
Engine oil check/fill tube and oil-drain hose Engine oil check/fill tube and oil-drain hose
Oil drain hose Oil drain hose

The engine oil check and fill tube are conveniently located for easy access. An oil drain hose makes draining oil easy and clean.

Engine oil filter Engine oil filter
Replaceable engine oil filter and fuel filter Replaceable engine oil filter and fuel filter

The replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.

Debris inspection port covers Debris inspection port covers
Debris inspection port Debris inspection port

Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 14-amp charging capacity
  • Regulated to keep the battery at full charge without risk of overcharging
Fuel tank
Convenient fuel filler opening Convenient fuel filler opening
  • The capacity is 2.4 U.S. gal. (9.1 L).
  • The fuel filler opening is conveniently located under the seat.
    • Filling the tank without spilling is easy.
    • A tethered fuel tank cap is more convenient.
    • The sealed fuel cap helps keep vapors inside the tank.
Accel Deep 42A Mower Accel Deep 42A Mower
Accel Deep 42A Mower Accel Deep 42A Mower

The 42-in. (107-cm) Accel Deep mower deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

  • 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
    • Optional MulchControl™ attachment provides superior mulching performance and versatility
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck suspended from the vehicle for a smooth and level cut
    • Adjustable mower wheels, positioned just above ground level, for reduced scalping
  • 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
  • Compatible with efficient 6.5-bu (229-L) two-bag material collection system
Excellent cut quality
Top view of 42A Mower Deck Top view of 42A Mower Deck
Underside of 42A Mower Deck Underside of 42A Mower Deck

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.
Productivity - gets the job done fast
Left side of Accel Deep mower deck Left side of Accel Deep mower deck
Right side of Accel Deep mower deck Right side of Accel Deep mower deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

  • Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
  • Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening
Cleanliness - for the mower and the operator
Accel Deep 42A Mower Deck Accel Deep 42A Mower Deck
Accel Deep 42A Mower Deck Accel Deep 42A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
    • Less need to clean and remove buildup of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
    • Limited amount of material to drift onto the operator and mower deck
    • Even flow of material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely and a MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash port Mower wash port
Mower wash port with hose connector Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

  • Hose connector is included with the mower deck.
Optional bagger
Optional bagger Optional bagger
Optional bagger Optional bagger

An optional 6.5-bu (229-L) cut-and-throw rear bagger material collection system (MCS) is available and comes with bagging blades. Special blades are not required but they can be installed for enhanced performance.

The bagger provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.

Mower blades
Mower blades shipped with the rear bagger chute Mower blades shipped with the rear bagger chute

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

  • High-lift bagging blades also work well when side discharging material.

Mulching blades are included with the MulchControl attachment. They can be used for mulching, side discharging, and bagging in most conditions.


Mower blade use chart

 Mode(s) of operation  Mower blade
 Side discharging mode only   Side-discharge blade (shipped with mower) 
 Bagging mode only  Bagging blade (shipped with rear bagger)
 Mulching mode only  Mulching blade (shipped with MulchControl attachment)
 Side discharge and mulching  Mulching blade (shipped with MulchControl attachment)
 Side discharge and bagging  Bagging blade (shipped with rear bagger)
 Side discharge, mulching, and bagging  Mulching blade (shipped with MulchControl attachment)
Superior durability is designed in
Hinged spindle pocket cover on the 42A Mower Hinged spindle pocket cover on the 42A Mower
Mower wheels are double captured for durability Mower wheels are double captured for durability

The 42A mower deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

  • Ribs in the deck shell add strength where it is needed.
  • The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) mower deck.

Mower wheels are double captured:

  • Provides greater strength and durability for longer, trouble-free life.
  • Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

S240 with 42-in. (107-cm) Accel Deep™ Mower Deck S240 with 42-in. (107-cm) Accel Deep™ Mower Deck
48-in. (122-cm) MulchControl handle 48-in. (122-cm) MulchControl handle

An advantage of having an Accel Deep mower deck is compatibility with the optional MulchControl attachment, which makes mulching more practical.

Advantages of mulching grass clippings include:

  • Creates a beautiful looking lawn
  • Smaller grass clippings fall into the lawn canopy rather than lie on top
  • Reduces the need for fertilizer
  • Grass clippings are not blown onto the operator, driveways, or flower beds
  • No need to dispose of bags of clippings

After it is installed and configured, the MulchControl attachment also has a handy feature where simple flips of a lever can:

  • Change between side-discharge and mulching modes
  • Change between bagging and mulching modes
How MulchControl works
42-in. (107-in.) MulchControl baffle closed 42-in. (107-in.) MulchControl baffle closed
48-in. (122-cm) MulchControl baffle open 48-in. (122-cm) MulchControl baffle open

NOTE: Optional front center rollers are shown in 48-in. (122-cm) mower deck photos.

MulchControl is an innovative, simple design that is easy to use and maintain. The MulchControl attachment includes baffles that control the flow of clippings material under the deck:

  • The baffles contain the clippings in a smaller space so the mower blades chop them multiple times. The baffles’ dimensions are designed to accommodate the mulching and discharge modes.
  • When the baffle gate is closed, the material stays under the deck and gets chopped into mulch that falls into the turf.
  • When the baffle gate is open, clippings material is passed out the side discharge opening.
48-in. (122-cm) MulchControl baffle closed 48-in. (122-cm) MulchControl baffle closed
48-in. (122-cm) MulchControl handle 48-in. (122-cm) MulchControl handle

The MulchControl handle is on top of the mower deck and is used to open and close the discharge baffle.

MulchControl is well-suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when the grass gets too long
  • For operators who usually side-discharge, but would like to be able to close the chute to control clippings
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who bag clippings, but want to go farther before emptying bags (mulching in parts of the property)

MulchControl puts the operator in control of the clippings.

MulchControl limitations

While in the side-discharge mode, MulchControl still mulches about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn cleanup is desired
Rear baffle (A) must be removed for bagging (only on 42-in. [107-cm] MulchControl) Rear baffle (A) must be removed for bagging (only on 42-in. [107-cm] MulchControl)

The 42-in. (107-cm) MulchControl attachment includes a rear baffle (A), held in place by two carriage bolts and 13-mm nuts, at the rear edge of the discharge opening. This baffle:

  • Is required for the full mulching mode
  • Can remain in place or removed for side-discharging material
  • Must be removed for installation of the bagger chute
MulchControl compatibility

There is an appropriate MulchControl attachment available for each Accel Deep mower deck type.

Mulching blades are included with each MulchControl attachment. They can be used for mulching, side discharging, and bagging in most conditions.

An exclusive 3-year or 200-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 200 Series Tractors.

  • The warranty is hassle free, with one company handling all of the paperwork.
  • Premium features of 200 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Two-pedal speed and direction controls Two-pedal speed and direction controls
Forward speed control pedal in use Forward speed control pedal in use

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.

Side-by-side foot pedals control the speed and direction of travel:

  • Automotive-type accelerator controls ensure easy operation.
  • The operator can change direction without lifting foot off the platform.
  • A large pedal surface gives superior operator comfort.
Hydrostatic transmission Hydrostatic transmission

Appropriate transmissions are used in each tractor model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

  • Tuff Torq TLT200 – S220
  • Tuff Torq K46 – S240

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.

Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor
Front blade, weather enclosure, and chains on a 100 Series Tractor Front blade, weather enclosure, and chains on a 100 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 46-in. (117-cm) Front Blade
  • Tire chains or TerraGrip traction belts
  • Weather enclosure
  • Weights

 

200 Series Tractor 200 Series Tractor
Solid, one-piece frame Solid, one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:

  • Full-length robotically welded frame design has high-strength steel rails for added strength and long life.
  • One-piece steel fender deck is bolted to the frame.
Cast-iron front axle does not bend
Front axle and wheel spindle Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector-and-pinion steering gears and single drag link and tie rod provides a very strong, low-effort, and tight-turning system.
  • Grease fittings allow regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (19-mm) diameter wheel spindles provide excellent durability.
Front bumper protects the tractor
Front bumper Front bumper
Front bumper Front bumper

The front bumper provides additional front-end protection and attractive, bold style.

CargO Mount™ system makes installation of rear bagger and other attachments easy
Rear CargO Mount points Rear CargO Mount points
Front CargO Mount points are at the top of the dashboard Front CargO Mount points are at the top of the dashboard
Rear bagger is mounted with CargO Mount points Rear bagger is mounted with CargO Mount points
Rear bagger is mounted with CargO Mount points Rear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front and rear mounting points that provide convenient and easy installation of the rear bagger and other attachments.

Comfortable operator station Comfortable operator station
Comfortable operator station, left side Comfortable operator station, left side

The operator station is designed for operator comfort and easy operation:

  • Controls are positioned where they are easy to reach and use to control the tractor.
  • The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
  • The seat is positioned to provide the most comfortable operator position
Steering wheel and dash Steering wheel and dash
Wide footrest with debris-removal channels Wide footrest with debris-removal channels

Controls are easy to see and use:

  • Large, three-spoke steering wheel for greater operator comfort and control
  • Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

  • The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
  • Debris-removing channels help keep the footrest area clean and dry.
Comfortable seat Comfortable seat
Easily adjusted seat Easily adjusted seat

Operator comfort is enhanced with a 15-in. (38.1-cm) high-back, two-piece seat with an open back:

  • Especially helpful when operating the tractor for extended periods of time
  • Easily adjusted forward or rearward while in the seat
  • Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height
Seat springs give a smoother ride Seat springs give a smoother ride
Seat tilted forward Seat tilted forward
Beverage holder and storage compartment Beverage holder and storage compartment

Beverage holder and storage compartment, with cover, are located on the right-side fender, conveniently located and easy to use.

Conveniently located controls Conveniently located controls
Dash instruments and controls Dash instruments and controls
Instruments and controls

Three-spoke steering wheel for greater operator comfort and control:

  • Large, 12-in. (30.5-cm) diameter steering wheel gives good comfort and control.

The contoured dash has clean, attractive styling:

  • Controls are color coded and labeled for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
  • The ignition switch is on the dash for starting ease.
  • Functional design of the controls provides good appearance and a comfortable feel.
Engine speed lever and spring-loaded choke lever Engine speed lever and spring-loaded choke lever
Power take-off (PTO) control lever Power take-off (PTO) control lever

 The engine speed lever and choke control lever are separate controls:

  • The engine speed lever is easy to use.
  • The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard:

  • Placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor
  • Designed for low effort, easy use, and reliable performance
Side-by-side transmission control pedals
Two-pedal speed/direction controls Two-pedal speed/direction controls
Side-by-side foot pedals Side-by-side foot pedals

Side-by-side foot pedals control the speed and direction of travel:

  • Automotive-type accelerator controls ensure easy operation.
  • The operator can change direction without lifting foot off the platform. A large pedal surface gives superior operator comfort.
Cruise control
Cruise control lever Cruise control lever

Cruise control is standard equipment:

  • To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
  • The cruise control can be released by pushing on the brake pedal or the forward pedal.
Parking brake control
Brake/parking brake pedal Brake/parking brake pedal
Parking brake lever Parking brake lever

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Mower deck height adjustment
Mower deck height adjustment lever Mower deck height adjustment lever

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

  • Increments of 1/4 in. (0.64 cm) allow fine-tuning the cut height.
  • Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
  • The lift handle is shaped for easy use and is out of the way of entering or exiting operators.
Reverse implement option (RIO)
RIO switch RIO switch
Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

  • Carefully check the area around the machine.
  • Disengage the mower before backing up.

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

  1. Stop forward travel.
  2. Look behind the machine to be sure there are no bystanders.
  3. Push and hold in the RIO switch while depressing the reverse pedal slightly.

NOTE: If the mower or other attachment stops while repositioning the machine, return the attachment engagement switch to the off position. Start engine and engage mower. Begin again with step 2. 

  1. Release the RIO switch and reposition the machine as the machine begins to move rearward.
  2. Resume forward travel. The mower or other attachment should continue operating.
  3. Repeat procedure to position the machine again.
Fuel tank gauge shows fuel level from the operator's seat
Easy-read fuel gauge Easy-read fuel gauge
Convenient fuel- filler opening Convenient fuel- filler opening

The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator’s seat:

  • Easy to check the fuel level
  • Convenient location
One-piece hood is easy to open One-piece hood is easy to open
Service interval decal located under hood Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
    • The high-quality engines used in the 200 Series Tractor do not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
Easy-to-service engine fuel and oil filters Easy-to-service engine fuel and oil filters
Easy access to fuel-fill opening Easy access to fuel-fill opening

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

The seat tilts up and out of the way to make adding fuel easy.

The 200 Series Tractor are covered by a 3-year/200-hour bumper-to-bumper warranty*:

  • Premium features of the 200 Series Tractors allow for this longer warranty period, with more coverage than other tractors of comparable size.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Hood will not dent or rust and includes quality headlights
One-piece hood opens for service access One-piece hood opens for service access
Quality headlights for good visibility Quality headlights for good visibility
  • Molded-in color material reduces sound and does not rust or dent.
  • Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time.
  • Openings on the side let in plenty of cooling air while keeping the sound level low.
  • Two headlights provide good lighting for nighttime operation.
MowerPlus app screen MowerPlus app screen
MowerPlus app maintenance screen MowerPlus app maintenance screen

Keep a John Deere lawn tractor running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, 200 Series, X300, X500, X700, Z200 through Z600, and many similarly sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

 

MowerPlus connectors also available (sold separately)
MowerPlus hour meter connector MowerPlus hour meter connector
MowerPlus deluxe smart connector, with a phone MowerPlus deluxe smart connector, with a phone

The John Deere MowerPlus connectors wirelessly link a lawn tractor to the MowerPlus app on a mobile device.

  Deluxe smart connector Hour meter connector
Compatible with lawn tractors

S120, S130, S160, S170, and S180
Model year 2021 and later S240 (SN 880,001- )

S100, S110, S140, S220
Communicates engine usage to track maintenance intervals X X
Communicates fuel level and battery health X  
Compatible with MowerPlus app for iOS® operating system X X
Compatible with MowerPlus app for Android™ operating system X  

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

Specifications


Compare the specifications of up to 4 models

Key Specs s220
Current Model
Engine power22 hp
16.4 kW
Oil changeNo-tools oil drain with replaceable filter
Engine manufacturer/model44J6 Cyclonic
Transaxle typeTLT200 hydrostatic, two-wheel drive
Transaxle controlSide-by-side pedals
Rear tires20x10-8
Lift system typeSpring-assisted hand-grip lever
Cutting widthAccel Deep™ mower deck, 42 in.
107 in.
U.S. warranty3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power22 hp
16.4 kW
Displacement44.2 cu in.
724 cc
Manufacturer/model44J6 Cyclonic
TypeOverhead valve, full-pressure lube, oil filter
CylindersV-twin, cast-iron liners
GovernorMechanical
Choke/speed controlSeparate levers, automatic choke return
Cooling methodAir
Air cleanerPleated paper cartridge filter with poly pre-filter
Oil changeNo-tools oil drain with replaceable filter
Fuel system
TypeGasoline
Fuel deliveryPulse pump and carburetor
Fuel gaugeMechanical, viewable from seat
Fuel tank locationRear
Fuel fill openingCenter, 1.75 in.
4.45 cm
Fuel tank capacity2.4 U.S. gal.
9.1 L
Electrical system
Battery12 V
300 CCA
Charging systemFlywheel alternator, regulated, 14 amp
Engine starterBendix type
HourmeterYes
HeadlightsTwo standard, incandescent
Taillights or reflectorNo
Backup lightsNo
Rear work lightsNo
12-V outletNo
Transaxle
TypeTLT200 hydrostatic, two-wheel drive
ControlSide-by-side pedals
Cruise controlStandard
Oil coolerFins and fan on transaxle
Oil filterInternal, not replaceable
Differential lockNo
Forward speed0-5.5 mph
0-8.9 km/h
Reverse speed0-3.2 mph
0-5.2 km/h
BrakesInternal wet disk
Chassis
FrameFull-length welded steel
Primer/paintE-coat/powder
Weight bracketOptional rear
Receiver hitchNo
Front axleCast iron front axle, front wheel sealed ball bearings
Spindle bushingsNo
Front tires15x6-6
Rear tires20x10-8
Hood materialMolded-in color material reduces sound, will not rust or dent
Fender deck materialStamped steel
Floor matsYes, with debris removing channels
StorageStorage tray with cover
Service interval decalYes
Fender handles/gripsNo
Cup holderYes
Equipment mountingCargO Mount™ system
Steering
TypeSector and pinion with single drag link and tie rod
Four-wheel steerNot available on this model
Steering wheelStandard design, diameter - 12 in.
30.5 cm
Tilt steering wheelNo
Turning radius18 in.
45.7 cm
Uncut circle radius24 in.
61 cm
Seat
TypeOpen-back design with grasp
Seat back height15 in.
38.1 cm
ArmrestsNo
Fore-aft adjustmentWhile seated, 5.5 in.
14 cm
Seat suspensionTilt, two rubber isolators
Lift system
TypeSpring-assisted hand-grip lever
Hydraulic outletsNo
Mower cut height13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments0.25 in.
0.64 cm
Preset cut heightNo
Mower deck
TypeSide discharge
Cutting widthAccel Deep mower deck, 42 in.
107 cm
ConstructionStamped steel deck shell
Mower deck materialSteel, 12 gauge
0.105 in.
2.6 mm
Mower wash portYes, with hose end
Mower drive systemElectric power take-off (PTO) clutch
Mower wheelsTwo
Mower wheel adjustmentOne bolt
Mower level adjustmentEasy-level deck
Mower attachability
TypeSlide under tractor
Front draft armsOne spring clip
Rear draft armsTwo spring clips
Mower wheels rotateNo
Drive systemSingle V-belt
Safety
Meets ANSI standardYes
Meets OPEI standardYes
Backup protectionReverse Implement Option (RIO)
Safety videoYes
Buyer's notes
NotesMolded-in color material reduces sound, will not rust or dent
Durable primer and powder paint finish
Large, 14-in. (36-cm) steering wheel for more comfortable operation
Warranty3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers
Rear bagger2-bag, 6.5 bu
229 L
Powered material collection
Mulching systemYes, MulchControl™
Front thatcher
Front blade46 in.
116.8 cm
Mid-mount blade
Snow blowerTwo-stage, 44 in.
111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
SprayerTow-behind only, 15 U.S. gal.
56.8 L
Tow-behind only, 25 U.S. gal.
94.6 L
SpreaderTow-behind only, 125 lb
57.7 kg
Tow-behind only, 175 lb
79.4 kg
Front bumperIncluded
Brush guard
Weather protectionWeather enclosure
Sun canopySun canopy
Rear receiver hitch
Bucket holderYes, single bucket
Grass stripingLawn striping kit
Tractor shovel
Front loader
Other equipment
Tow-behind tools16
Dimensions
Height45 in.
114 cm
Overall length75.1 in.
191 cm
Wheelbase48.9 in.
124.2 cm
Width with mower50 in.
127 cm
Width with mower (deflector raised for storage)49 in.
124 cm
Width without mower
Weight481 lb
218 kg

Accessories and Attachments

Carts

Utility Cart, 7P Poly - 3090GXLP21935

Utility Cart, 8Y Convertible Poly - 3090GXLP22755

Utility Cart, 10P Poly - 3090GXLPPCT10JD

Utility Cart, 10PX Poly with full dump - 3090GXLP72978

Utility Cart, 13 Steel - 3090GXLPHDC13JD

Utility Cart, 16YS Swivel Poly - 3090GXLP68186

Utility Cart, 17P Poly - 3090GXLPPCT17JD

Complete MCS

Drawbar

Front Blade

Home Maintenance Kits

Miscellaneous

Battery charger and maintainer - 3090GXTY25866

Bucket holder (single) - 3090GXLPJD100

Fuel-Protect for gasoline engines, 8 oz (237 mL) - 3090GXTY27534

Wireless connector packaging Wireless connector packaging

The John Deere MowerPlus hour meter connector wirelessly links a model year 2003 and newer 100 Series or 200 Series Lawn Tractor to the MowerPlus app on a mobile device:

  • No tools are needed for installation.
  • Detailed setup instructions are included.
  • The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
  • The wireless connector and app work together to offer helpful information.

Tractor features available for viewing on the MowerPlus app include:

  • Tractor engine hours automatically synchronized to the app
  • In-app maintenance reminders and log, based on engine hours
  • Help to determine the best time to mow
  • Expert pre-mow optimization tips
  • Maintenance walk-through instructions

The operator can visit their device’s app store to see new app features as they are added.

MowerPlus hour meter connector (BUC10510) for 100 and 200 Series Lawn Tractors
Hour meter connector (socket end shown) Hour meter connector (socket end shown)
Hour meter connector (pin end shown) Hour meter connector (pin end shown)

The hour meter connector plugs into the back of a 100 or 200 Series Tractor key switch. The tractor’s wiring harness plugs into the other end.

Compatibility and requirements

BUC10510 MowerPlus hour meter connector is for use with:

  • Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
  • Model year 2015 to 2020 S240 Tractors (serial number -880,000)
  • S100, S110, S140, and S220 Tractors

NOTE: Model year 2021 and newer 100 and 200 Series Tractors equipped with a digital fuel gauge are compatible with the more-capable BUC10929 MowerPlus deluxe smart connector.

MowerPlus hour meter connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:

  • iOS® version 10 or higher is compatible with the hour meter connector.
  • Android™ versions are not compatible with the hour meter connector at this time.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

 

Mower Blades

Blade (42A bagging) - 3090GXGX25668

Blade (42A mulching) - 3090GXM170642

Blade (42A side discharge) - 3090GXUC22008

Mower Decks

42-in. (107-cm) Mower Deck top 42-in. (107-cm) Mower Deck top
42-in. (107-cm) Mower Deck bottom 42-in. (107-cm) Mower Deck bottom

This complete mower deck can be ordered for replacement, if required.

Incomplete decks that include only the shell, discharge chute, and decals are also available through the John Deere Parts system.

The 42-in. (107-cm) Mower Deck comes with two medium-lift blades for normal cutting and bagging conditions.

Grass Striping Groomer for 42A Deck - 3090GXLP63762

Mower deck leveling gauge - 3090GXAM130907

Mulch Kits

Protection

Riding mower cover, for tractor with material collection system - 3090GXLP70686

Riding mower cover, medium deluxe - 3090GXLP93617

Riding mower cover, standard - 3090GXLP93917

Seat cover, medium deluxe yellow - 3090GXLP92624

Seat cover, medium standard yellow - 3090GXLP92324

Spark Arrester

Sprayers

Mounted Sprayer, 15 gal. (57 L) (100 and 200 Series) - 3090GXLP53283

Tow-Behind Sprayer, 15 gal. (57 L) - 3090GXLP19478

Tow-Behind Sprayer, 25 gal. (95 L) - 3090GXLP19479

Spreaders

Pull-Type Spin Spreader, 125 lb (57 kg) - 3090GXLP25353

Pull-Type Spin Spreader, 175 lb (80 kg) - 3090GXLP25354

Tow-Behind Aerator-Spreader, 40 in. (102 cm) - 3090GXLPAS40JD

Tow-Behind Broadcast Spreader, 130 lb (59 kg) - 3090GXLP39087

Tow-Behind Broadcast Spreader, 175 lb (80 kg) - 3090GXLPBS36JD

Sun Protection

Thatchers

Tire Chains

TerraGrip traction belts (pair) for 20x10-8 Turf Saver and 22x9.5-12 tires - 3090GXLP39857

Tire chain with optional wheel weights on X728 Tractor Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using equipment such as a snow blower or front blade.

One pair of chains is included in each bundle.

Compatibility

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, E120, S100, S110, S120, and S140 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, E180, S130, S160, S170, S180, and S220 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016 and newer (serial number 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year 2015 and older (serial number -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

Lawn Sweeper, 42 in. (107 cm) - 3090GXLPSTS42JD

Lawn Sweeper, 44 in. (112 cm) - 3090GXLP49038

Lawn sweeper dethatcher kit (LPSTS42JD) - 3090GXLP42108

MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - 3090GXLP39089

Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - 3090GXLPPRT36JD

Tow-Behind Plug Aerator, 40 in. (102 cm) - 3090GXLPPA40JD

Tow-Behind Spiker Aerator, 40 in. (102 cm) - 3090GXLPSAT40JD

Weather Enclosures

Weather enclosure shown on S180 Tractor Weather enclosure shown on S180 Tractor

The roomy steel-frame cab shields you against snow, rain, sun, and wind to make snow removal a more pleasant experience.

This weather enclosure is compatible with model year 2011 and newer 100 Series and 200 Series Tractors:

  • Model year 2011 and newer 100 Series Lawn Tractors including all models with prefix of D, E, and S
  • All 200 Series Lawn Tractors
Access slot for control arm (zipper closed) Access slot for control arm (zipper closed)
Access slot for control arm (zipper open) Access slot for control arm (zipper open)

Key features include:

  • Double-zipper slots located mid-door on both the right and left side allow easy access to control arms and enhance isolation from the elements
  • Forward-raked windshield helps reduce snow and ice accumulation for improved operator visibility
  • Super-clear vinyl windows are cold-crack tested to -20 °F (29 °C)
  • Double-zipper access slot for snowblower chute-control cable and chute crank
  • Assembles and installs with standard hand tools in about one hour
  • Frame-mounted attachment bracket for fixing chute-control handle and chute-crank handle within the cab
  • Internal non-scratch magnets ensure a custom fit around the tractor’s fender deck
  • Rear locking panel holds enclosure tight against tractor frame
  • Overall height from ground to the top of cab is 78 in. (198 cm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Weather enclosure

Order number: LP74604

Weights

34-lb (15-kg) Wheel Weight (1), cast iron, 5-in. or 6-in. front wheel - 3090GXBUC10724

Quik-Tatch Weight, 42 lb (19 kg) - 3090GXUC13263

Quik-Tatch Weight, 42 lb (19 kg), boxed - 3090GXBG20029

Rear weight bracket (100 Series) - 3090GXBG20627

Wheel weight mounting hardware for attaching one front wheel weight - 3090GXBM17978