×
Quick Equipment Search
Equipment Fliter












used search tag

Z950R MOWER

ZTrak™ Zero-Turn Mower

  • 7-Iron™ PRO Mowing Deck
  • Mulch On Demand™ Available
  • Propane Option Available
  • Cross-porting hydraulic transmission


Apply For Financing




Features



Z955R EFI model shown with optional X® Tweel® Turf airless radial tire technologyZ955R EFI model shown with optional X® Tweel® Turf airless radial tire technology
#

The durability features of the frame are as follows:

  • Heavy-duty, thick-gauge, steel channel mainframe for strength and durability
  • Cast I-beam caster arms to handle the beating and pounding professional mowers receive
  • Wide-open access for maintenance and cleaning
Two-piece rear bumper provides protection
Illustration of ZTrak™ mower rear bumperIllustration of ZTrak™ mower rear bumper

A steel rear bumper provides protection for the machine. The bumper is made of two pieces, making it easy to remove and install when using a material collection system (MCS).

A rear hitch can be added to the steel bumper for towing purposes. ZTrak E, M, and R Series Mowers can tow up to 400 lb (181.4 kg).

Michelin, X, and Tweel are trademarks of Michelin North America, Inc.

Flat-free rear tire shown on ZTrak Mower Flat-free rear tire shown on ZTrak Mower

John Deere provides the commercial mower industry with the Michelin X Tweel Turf technology for Commercial ZTrak Mowers:

  • 24x12N12 as an ordering option code for ZTrak Gas Mowers with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks
    • 24x12N12 is also available as base code equipment for ZTrak Gas Mowers with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks (ordering information available at Configurator on the Tweel model page)
  • 24x12N12 as an ordering option code for ZTrak Z994R Diesel with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183 cm) Mower Decks
  • 26x12N12 as an ordering option code for Z997R Diesel with 60 in. and 72 in. (152-cm and 183-cm) Mower Decks

Michelin is a world leader in tire manufacturing and technology. This airless radial tire solution is an industry first for John Deere, which provides an additional advantage to John Deere customers.

Advantages of the Michelin X Tweel Turf include:

  • Mowing performance is improved.
    • Rutting is reduced because the Michelin X Tweel Turf has more support across the surface for improved flotation and better ground contact.
    • Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires.
    • Excellent curb climbing is possible due to the Michelin X Tweel Turf construction and flexibility.
    • More consistent cut quality is achieved because inconsistent tire pressure is eliminated.
  • Uptime is improved.
    • The exclusive technology eliminates downtime and associated cost due to flat or damaged tires.
    • Punctures and sidewall damage no longer result in downtime.
  • Cost of operation is reduced.
    • Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment.
    • No need to spend time checking and optimizing tire pressure.
    • The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them.
    • The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread.
Michelin X Tweel Turf Michelin X Tweel Turf
Michelin X Tweel Turf Michelin X Tweel Turf

Heavy-duty construction provides the ultimate in performance and reliable operation:

  • High-strength poly-resin spokes carry the load.
  • Four-hole, heavy-duty steel hub for durability.
  • Deep, open-tread design provides excellent cleaning and traction.
  • Zero degree, high-tensile proprietary carcass provides great lateral stiffness while resisting damage from impact and penetration.

NOTE: In some cases, different size Tweel tires are required depending on the mower deck size.

Tires deliver exceptional traction and maneuverability
Drive tireDrive tire
Front caster tireFront caster tire

The ZTrak R Series Mowers with 48-in. (122-cm) mower decks come with 24x9.5-12 4 PR drive tires. R Series Mowers with 54-in. (133-cm), 60-in. (152-cm) and 72-in. (183-cm) decks come with 24x12-12 4 PR drive tires. All R Series Mowers are equipped with 15x6-6 front flat-free tires for the following:

  • Excellent traction, flotation, and curb climbing
  • Low center of gravity to increase hillside mowing capability
  • Caster wheels and caster wheel towers with sealed bearings for long life and easy steering
  • Offset front caster wheels to help improve the inside corner-trim performance and reduce between-blade striping

Michelin, X, and Tweel are trademarks of Michelin North America, Inc.

Z950M and Z950R engineZ950M and Z950R engine
#

The Z950M and Z950R are powered by an air-cooled, vertical shaft engine:

  • 27-hp (20.1-kW) gas engine

Engine features include:

  • Overhead valve design
    • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
  • Full-pressure lubrication with full-flow filter
    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Oil filter helps keep oil clean for increased engine life
    • V-twin big block design
  • Vertical shaft
  • Easy-access, dual-element air filter with quick-release latch
  • 15-amp alternator
  • Fuel pump
  • Complies with strict Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque
  • Aluminum block engines
    • Effectively dissipate heat
    • Lightweight and strong construction
    • Extend engine life due to elimination of debilitating engine temperatures
    • Air-cooled engine design
Air cleaner filters out dust that can damage an engine
Engine air cleanerEngine air cleaner
Air cleaner cover removedAir cleaner cover removed

ZTrak™ Z900 Mowers are equipped with a dual-element, canister-style air filter, easily accessible from the rear of the machine without tools.

  • The filtration system pulls clean air from above the engine, in turn filtering out the dust that can damage an engine over time.
  • Filters are extremely easy to change when required.
  • Pre-cleaner provides more protection against contamination in dusty and dirty applications.
Mow all day on a single tank of fuel with efficient and easy-to-fill fuel tank
Fuel tank and filler neckFuel tank and filler neck
Fuel filler neckFuel filler neck

The ZTrak™ Z900 Mowers are equipped with one single-fill, top-draw fuel tank:

  • 11.5-U.S. gal. (43.5-L) capacity enables operators to mow all day without refueling.
  • The fuel gauge makes it quick and easy to see how much fuel is in the tank.
  • Top draw provides added safety.
  • A large fuel-filler neck is angled to make it easy for an operator to complete the fueling process.

Under normal conditions, load, and operation, fuel consumption for the Z900 ZTrak Mowers is 1.5 U.S. gph (5.7 L/hr) to 2.2 U.S. gph (8.3 L/hr), depending on the horsepower and conditions.

Propane conversion kit on a Walk-Behind MowerPropane conversion kit on a Walk-Behind Mower
Propane conversion kit on a ZTrak MowerPropane conversion kit on a ZTrak Mower

John Deere provides application-specific Environmental Protection Agency (EPA) and California Air Resources Board (CARB) approved field-installed propane conversion kits for specific John Deere Commercial Walk-Behind Mowers, QuikTrak Mowers, and ZTrak Mowers. The conversion kits include all components required to convert the engines to operate on propane fuel. Single-tank or dual-tank brackets (depending on the vehicle) are provided for securely holding the propane tank(s) to the vehicle.

Propane tanks are not included.

An optional altitude kit is required when operating at altitudes above 2000 ft (610 m). The operator’s manual with the propane conversion kit provides further details. Parts must be ordered separately through John Deere Parts.

Propane facts:

  • Propane is flammable and commonly used as a fuel.
  • The molecular formula of propane is C3H8, and it is in the family of liquefied petroleum gases (LP gases). The other LP gases include butane, propylene, butadiene, butylene, isobutylene, and mixtures thereof.
  • Propane is commonly available and has proven to be a dependable, safe, economical, and clean-burning fuel. It can be used as household fuel, industrial fuel, and fuel for internal combustion engines. Propane has been used as a fuel since 1910.
  • At atmospheric pressure, propane boils at -44°F (-42.2°C), meaning it typically exists as a vapor. However, when contained under pressure, such as in a propane cylinder, it can exist as a liquid.
  • Propane is naturally odorless, but includes an additive odorant, usually mercaptan, which gives it a distinct odor.
  • Vapor propane is heavier than air, meaning it will settle in low areas such as along the ground or in drains.

 Advantages of John Deere propane conversion kits include:

  • Reduced fuel costs, up to 30 percent depending on fuel prices
  • Lower emissions
  • Reduced fuel-system maintenance
  • Maintains John Deere warranty
  • EPA and CARB certified
  • May qualify for national and state rebate and incentive programs. Please visit www.propane.com/commercial-landscape/programs-and-incentives/ for further information.

Propane tank mounting bracket options:

Single propane tank shown on QuikTrak MowerSingle propane tank shown on QuikTrak Mower
Dual propane tanks shown on ZTrak MowerDual propane tanks shown on ZTrak Mower

 Optional tank configurations and sizes are available to provide operators the ability to tailor for run time:

  • Commercial Walk-Behind Mowers have only a single-tank mounting option.
    • The single-tank bracket is designed for one 20-lb (9.1-kg) or 33-lb (15-kg) Worthington tank.
      • Tank is not included.
  • QuikTrak Mowers have single-tank and dual-tank mounting options.
    • The single-tank, right-side bracket is designed for one 33-lb (15-kg) Worthington tank.
      • Tank is not included.
    • The dual-tank brackets are designed for two 20-lb (9.1-kg) Worthington tanks.
      • Tanks are not included.
  • ZTrak Mowers have single-tank and dual-tank mounting options.
    • The single-tank, left-side bracket is designed for one 33-lb (15-kg) or 43-lb (19.5-kg) Worthington tank.
      • Tank is not included.
    • The dual-tank brackets are designed for two 33-lb (15-kg) Worthington tanks.
      • Tanks are not included.
      • ZTrak Mowers with dual-tank configurations are not compatible with any material collection systems.

NOTE: Reference the Propane and Attachment Compatibility Chart to determine tank configurations that are compatible.

Estimated run-time comparison
Engine displacement FS603ccFS726cc FX726ccFX852cc
Average consumption (lb [kg]/hr)3.9 (1.8)4.2 (1.9)4.2 (1.9)5.8 (2.6)
Run time (hours) with 20-lb (9.1-kg) tank5.14.84.83.4
Run time (hours) with 33.5-lb (15.2-kg) tankNot available8.08.05.8
Run time (hours) with 43.5-lb (19.7-kg) tankNot available10.410.47.5
Field-installed propane conversion kit compatibility:

NOTE: Conversion to propane is not intended for units with engines having more than 250 hours of use.

Commercial Walk-Behind Mowers (model year 2018 and prior)

 WG SeriesWH SeriesWHP Series
Model                                WG32AWG36AWG48AWH36AWH48AWH52AWH61AWHP36AWHP48AWHP52AWHP61A
Engine modelFS481VFS481VFS481VFS481VFS600VFS600VFS691VFS481VFS600VFS600VFS691V
Engine displacement603 cc603 cc603 cc603 cc603 cc603 cc726 cc603 cc603 cc603 cc726 cc
Propane kit model numberNot availableNot availableNot availableFS603ccFS603ccFS603ccFS726ccFS603ccFS603ccFS603ccFS726cc

QuikTrak Mowers

 E SeriesM SeriesR Series
Model                                  652E636M648M652M648R652R652R EFI661R661R EFI
Engine modelFX691VFS600VFX691VFX691VFX691VFX730VECV740 EFIFX730VECV740 EFI
Engine displacement726 cc603 cc726 cc726 cc726 cc726 cc747 cc726 cc747 cc
Propane kit model numberFX726ccNot availableNot availableNot availableFX726ccFX726ccNot availableFX726ccNot available

Commercial ZTrak Mowers

 E SeriesM Series     R Series 
Model                                  Z915EZ920MZ930MZ945M EFIZ950M Z955M EFIZ960MZ930RZ950RZ955R EFIZ970R
Engine modelCV742FX730VFX801VECV850 EFIFX850VECV860J EFIFX921VFX801VFX850VECV860J EFIFX1000V
Engine displacement747 cc726 cc852 cc824 cc852 cc824 cc999 cc852 cc852 cc824 cc999 cc
Propane kit model numberNot availableFX726cc*FX852cc*Not availableFX852cc*Not availableNot availableFX852cc*FX852cc*Not availableNot available
*Not compatible with 48-in. (122-cm) mower decks.

Worthington tanks are manufactured by Worthington Industries, Inc.

Heavy-duty ground driveHeavy-duty ground drive

The hydrostatic drive included with the R Series Mowers features two 13-cc (0.8-cu in.) unitized hydraulic pumps combined with commercial-grade, heavy-duty, 13-cc (0.8-cu in.) wheel motors into a single unit. The R Series drive units feature cross porting, where the hydraulic fluid from the side doing the least work is filtered and then fed into the input of the side doing the most work. This ensures that the coolest fluid is going into the side working the hardest in order to provide the best performance during extended hillside operation in the same direction.

One pump and one motor drive each wheel on the ZTrak™ R Series Mowers. This provides several benefits:

  • Exceptional cooling in high load conditions
  • Easy-to-check level and refill hydraulic oil
  • Opens up access under the seat

There are two seating options available for the R Series, all of which are factory installed

  1. Deluxe comfort seat with armrests and isolation
  2. Fully adjustable suspension seat with armrests
ComfortGlide fore/aft suspension
ComfortGlide fore/aft suspension control leverComfortGlide fore/aft suspension control lever

Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:

  • Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
  • Control lever provides the ability to easily lock out fore/aft suspension movement if desired.
  • One lever has three functions:
    • Slide seat forward and back 3 in. (10.2 cm) to allow the operator the ability to choose the leg room needed
    • Activate ComfortGlide fore/aft seat suspension
    • Lock out ComfortGlide fore/aft seat suspension
Deluxe comfort seat with armrests and isolation
Deluxe comfort seat with armrests and isolationDeluxe comfort seat with armrests and isolation
Rubber isolation mountRubber isolation mount

The deluxe comfort seat with armrests and isolation is available on the E, M, and R Series:

  • Rubber springs are provided to isolate the seat base and to increase ride comfort.
  • A convenient seat latch makes it easy to lift the seat.
  • Isolation mounting is a good feature to reduce vibration for operators who do not require the fully adjustable suspension seat option.
  • Factory installed on Z900s ordered with the deluxe comfort seat with armrests and isolation option.
Fully adjustable suspension seat with armrests
Fully adjustable, mechanical suspension-seatFully adjustable, mechanical suspension-seat
Suspension seat controlSuspension seat control

A fully adjustable suspension seat with armrests option is available on the M and R Series:

  • Adjustable back angle is provided for individual operator comfort.
  • Adjustable lumbar support helps to suit the needs of the operator.
  • A suspension seat control dial gives easy adjustment for operator weight and ride comfort.
  • A convenient seat latch provides ease of lifting the seat.
  • On Z900s ordered with the fully adjustable suspension seat with armrests option, it is factory installed.
Designed for operator comfort
Operator stationOperator station
Operator stationOperator station

Two-lever hydrostatic control provides the following:

  • The operator can select the ground speed and direction control simply by moving levers forward or reverse.
  • Positive neutral lock position for levers provides added safety.
  • Brake & Go operator-presence system returns levers to the neutral position when the brake pedal is actively engaged. 
  • Starting the machines is as easy as starting a car. It no longer matters if the control levers are extended out or pulled in, as long as the parking brake is engaged. Just turn the key and go.
  • Wide-bend, large-diameter steering levers swing out easily for entry and exit from the operator platform.
Foot pegs
Foot pegs available as standard on R-spec Z900’sFoot pegs available as standard on R-spec Z900’s

Foot pegs help in providing the operator with a comfortable foot placement:

  • Location and angle of foot pegs can be adjusted for individual operator comfort.
Foot platform isolators
Foot platform isolatorsFoot platform isolators

Foot platform isolators provide the operator with added comfort:

  • Vibration to the legs and feet is reduced.
Brake & Go starting system
Parking brake pedal (Z900R Series)Parking brake pedal (Z900R Series)
Parking brake lever (Z900 E and M Series)Parking brake lever (Z900 E and M Series)

The Brake & Go starting system is a John Deere exclusive. This feature makes the starting process on all ZTrak™ mowers easier, while also making it possible to remove two interlock switches from the machine.
 
The Brake & Go starting procedure helps a novice operator look and feel like a professional. To start the machine, the parking brake must be engaged. It does not matter whether the power take-off (PTO) switch is on or off, nor does it matter if the control levers are pulled in or in the out position.
 
As long as the parking brake is engaged, the machine will start. When the parking brake is applied, the control levers cannot be moved to the forward or reverse positions.

Adjustable levers
Adjustable leversAdjustable levers

The motion control levers have two height positions and can also be adjusted forward or rearward within the slotted holes. The levers should be adjusted so the operator can achieve a full range of control operation comfortably.

Tracking adjustment
Tracking adjustmentTracking adjustment

The easy-to-turn (from-the-seat) tracking adjustment allows operators to keep their mowers straight and able to produce professional striping results.

Easy-to-operate height-of-cut adjustment enables on-the-go changes
Mower deck height adjustment knobMower deck height adjustment knob

An easy-to-use cutting-height lift system allows the operator to adjust the mower deck height with no tools and minimal effort. The easy-to-grip knob allows operators to dial in the desired height of cut (HOC).

Cutting height can be adjusted from approximately 1 in. to 5.5 in. (2.5 cm to 14 cm). Each increment on the knob adjusts the HOC approximately 0.25 in. (0.64 cm). The deck can also be raised and locked in a transport position to provide maximum ground clearance when moving the machine from one area to another.

The transport lock function allows the deck to be returned to the previous HOC after being in the transport position:

  • Use the foot-lift pedal to lift the deck and engage the transport lock.
  • Rotate the knob to adjust from 1 in. to 5.5 in. (2.5 cm to 14 cm) in 0.25-in. (0.64 cm) increments.

This design increases productivity by allowing operators to change the cutting height without having to leave the seat.

Onboard storage and cup holder
Onboard storageOnboard storage
Cup holderCup holder

Several storage areas are provided on the ZTrak machines. A convenient cup holder is also available.

Right-hand control panel
Right-hand control panelRight-hand control panel
Right-hand control panelRight-hand control panel

The controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height-of-cut, diagnostics, and hour meter:

  • Rocker-type PTO switch
  • Height-of-cut knob with transport lock
  • Key switch
  • Hourmeter
  • Throttle
  • Separate choke control
    • Easy choke operation yields less fouling of plugs
    • No choke required for the electronic fuel injection (EFI) models
Comfort and convenience handlesComfort and convenience handles

The comfort and convenience package combines large, ergonomically angled control levers with specially padded grips to provide unmatched comfort and reduced fatigue:

  • Keeps hands on the control sticks to minimize equipment damage and make them more comfortable over long operating days.

The control levers have built-in electronic controls to raise or lower the mower deck or disengage the mower blades.

Control buttonsControl buttons

The push button (A) on the left motion control lever raises the mower deck.

The push button (B) on the right-hand control lever shuts off the PTO.

Once the PTO has been shut off using the button, the PTO switch must be pushed down and pulled up again to engage the PTO.

Z955R EFI left front viewZ955R EFI left front view

The design of the Z900 Series makes many service components reachable and easily accessible from the ground.

  • Large, open engine compartment at the rear of the machine provides convenient servicing and ensures the engine heat is directed away from the operator.
Flip-up foot panelFlip-up foot panel
Flip-up seatFlip-up seat
Onboard maintenance chart
Maintenance chartMaintenance chart

All ZTrak™ Mowers come with an onboard maintenance chart that is conveniently located inside the right-hand console. The service interval chart gives necessary service intervals.

Diagnostics
Hour meter (M Series pictured)Hour meter (M Series pictured)
Diagnostic chartDiagnostic chart

The hour meter shows the number of hours the machine is run when the key switch is in the on position. It only counts the hours the engine is actually running. Machine diagnostics are the first step of a monitoring system to help operators quickly diagnose common downtime issues. A trouble code light is included on the hour meter.

 

Use of the hour meter and service interval chart helps determine when the machine will need service.

Rollover protective structure (ROPS) enhances operator safety
ROPS upROPS up
ROPS mid positionROPS mid position
ROPS down positionROPS down position

The ZTrak™ Z900E, M, and R Series Mowers are equipped with a standard two-post folding ROPS and seat belt. The folding ROPS enhances operator safety and provides ample clearance when storing the mower in garages or sheds:

  • ISO21299 certification
  • Foldable

The ROPS system can be repositioned without the use of tools. Under normal operation, the ROPS should be in the up position. If operating in low clearance areas, they can be folded and secured out of the way. The ROPS can also be pinned halfway down to accommodate machines equipped with a material collection system.

Z955M ZTrak™ MowerZ955M ZTrak™ Mower
Z955R ZTrak MowerZ955R ZTrak Mower
E and M Series 3-year, 1200-hour bumper-to-bumper warranty

An exclusive 2-year, unlimited hour/3-year, 1200-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

NOTE: 36 months or 1200 hours, whichever comes first. For the first 24 months, there is no hour limitation.

R Series 3-year, 1500-hour bumper-to-bumper warranty

An exclusive 2-year, unlimited hour/3-year, 1500-hour (whichever comes first) bumper-to-bumper warranty is standard on all John Deere R Series mowers. The warranty is best in the industry and puts John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

NOTE: 36 months or 1500 hours, whichever comes first. For the first 24 months, there is no hour limitation.

Mower decks are safety certified
Z950M ZTrak MowerZ950M ZTrak Mower

Mowers decks are evaluated by the manufacturer (John Deere Turf Care) and conform to American National Standards Institute (ANSI) B71.4 2004 safety certification specifications for commercial turf care equipment.

72-in. (183-cm) 7-Iron PRO deck shown72-in. (183-cm) 7-Iron PRO deck shown

The ZTrak™ M and R Series Mowers are equipped with either a side-discharge or Mulch On Demand™ 7-Iron PRO deck.

7-Iron PRO mower decks have demonstrated quality, performance, and durability. They deliver a high quality cut in diverse conditions.

Key features of the 7-Iron PRO mower deck:

  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break - it is stamped from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
  • Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
  • A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
  • The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
Mower rectangular leading-edge reinforcementMower rectangular leading-edge reinforcement
Dual-captured anti-scalp wheelDual-captured anti-scalp wheel

Key features of the 7-Iron PRO mower deck:

  • Deck has rectangular leading deck edge reinforcement and the rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • Dual-captured front and rear anti-scalp wheels provide deck flotation over even the toughest terrain.
  • Three 1-in. (2.5-cm), cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast aluminum providing both excellent strength and heat dissipation.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and is reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Three spindle grease fittings are accessible from the top.
  • Blade overlap is 1.6 in. (40.6 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
  • Quick-change, cutting-height adjustment.
7-Iron PRO mower deck
M SeriesR Series
Z920M - 48 in. (122 cm), 54 in. (137 cm), 60 in. (152 cm)Z930R - 54 in. (137 cm), 60 in. (152 cm)
Z930M - 54 in. (137 cm), 60 in. (152 cm)Z950R - 60 in. (152 cm), 72 in. (183 cm)
Z945M EFI - 60 in. (152 cm)Z955R EFI - 60 in. (152 cm)
Z950M - 60 in. (152 cm), 72 in. (183 cm)Z970R - 60 in. (152 cm), 72 in. (183 cm)
Z955M EFI - 60 in. (152 cm), 72 in. (183 cm) 
Z960M - 60 in. (152 cm), 72 in. (183 cm) 
Mower deck step shown on 72-in. (183-cm) mowerMower deck step shown on 72-in. (183-cm) mower

The deck step safely aids the operator's entrance and egress from machine.

Mulch On Demand mower deckMulch On Demand mower deck
Mower deck with chute closedMower deck with chute closed

The Mulch On Demand mower deck delivers unprecedented levels of productivity and versatility to commercial mower operation. With the ability to switch between side discharge and mulching operation with the flip of a lever as the operator mows, keeping most clippings out of landscaping features and where they are wanted is extremely easy.

Mulch On Demand openMulch On Demand open
Mulch On Demand closed (latch standard on material collection system [MCS] equipped models only)Mulch On Demand closed (latch standard on material collection system [MCS] equipped models only)
Lever position open (latch standard on MCS-equipped models only)Lever position open (latch standard on MCS-equipped models only)
Lever position closedLever position closed

Key features of the 7-Iron™ PRO Mulch On Demand mower deck:

  • Deck can be converted from a wide-open side discharge mode to a fully chambered mulching mode with a single move of a lever.
    • NOTE: Mulch On Demand decks are a balance between a side discharge deck and a side discharge deck with a mulching kit.
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
  • Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
  • Rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • Deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
  • Wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
  • Three 1-in. (2.5 cm) cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast aluminum providing both excellent strength and heat dissipation.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Dual-captured anti-scalp wheels provide deck flotation over even the toughest terrain.
  • Three greasable spindle zerks accessible from the top.
  • Blade overlap is 1.6 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
  • Quick-change, cutting-height adjustment.
7-Iron PRO Mulch On Demand mower deck
M SeriesR Series
Z920M - 48-in. (122-cm) Mulch On DemandZ930R - 54-in. (137-cm) Mulch On Demand
Z930M - 54-in. (137-cm) Mulch On Demand
Z930M - 60-in. (152-cm) Mulch On Demand
Z950R - 60-in. (152-cm) Mulch On Demand
Z945M EFI - 60-in. (152-cm) Mulch On DemandZ970R - 60-in. (152-cm) Mulch On Demand
Z950M - 60-in. (152-cm) Mulch On Demand 
Z955M EFI - 60-in. (152-cm) Mulch On Demand 
Z960M - 60-in. (152-cm) Mulch On Demand 
Spindle assemblySpindle assembly

On every John Deere ZTrak™ mower deck, there are three 1-in. (2.5-cm) spindles that are cold-forged and heat-treated for strength without bulk. The spindles are supported by precision ball bearings, providing great performance and reliability.
 
The spindle housing is made of aircraft-grade, ribbed cast aluminum. This unique casting design embosses reinforcing gussets in the housing, which adds both strength and cooling surface area that stands up to commercial applications.
 
These spindles can be greased from the top and require no disassembly to reach. Grease channels provide lubrication to both bearings.

Specifications


Compare the specifications of up to 4 models

Key Specs z950r-mower
Current Model
Engine Manufacturer/modelFX850V
Engine PowerGross at 3,600 rpm: 27 hp
20.1 kW
Fuel tank capacity11.5 U.S. gal.
43.5 L
Mower deck Size60, 72 in.
152, 183 cm
Blade tip speedApproximately 18,000 fpm
5,486 m/min
TransmissionHydrostatic
Speed range0-12 mph
0-19.3 km/h
Drive wheels24x12-12
Caster wheels13x6.5-6
Warranty36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Engine
Manufacturer/ModelFX850V
PowerGross at 3,600 rpm, 27 hp
20.1 kW
Displacement52 cu in.
852 cc
CylindersTwo
Crankcase capacityWith filter, 2 U.S. qt
1.9 L
Oil filterFull flow, replaceable
LubricationFull pressure
CoolingAir
Air cleanerPre-cleaner
Yes
Heavy-duty canister type with safety element
Fuel system
Fuel typeGasoline
Fuel consumptionUnder normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valveYes
Electrical system
Charge system20 amp
Battery voltage12 V
Cold cranking amp300 amp
Hour meterStandard, digital
Operator presence starting systemBrake-N-Go (foot)
Drivetrain
TransmissionHydrostatic
Hydraulic pumps
Wheel motorsTuff Torq heavy-duty integrated piston wheel motor
Travel speedSpeed range
0-12 mph
19.3 km/h
Forward
0-12 mph
19.3 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Speed and direction controlTwin levers
Hydraulic capacity5.9 U.S. qt
5.6 L
Hydraulic oil cooler
FilterInternal, replaceable
Buyer's note
Tires
Drive wheels24x12-12
Rear tires
Load rating4 PR
Brakes
Dynamic brakingTwin levers
Park brakeInternal wet disk integrated in the transmission
Park brake actuationFoot brake
PTO
TypeElectro-magnetic, 225 lb-ft
305 Nm
DriveV-belt
Mower decks
Size60, 72 in.
152, 183
Deck construction7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness7 gauge
0.18 in.
4.6 mm
DischargeSide, Mulch On Demand™ system
Height-of-cut rangeIncrements
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width60, 72 in.
152, 183 cm
Blades
LengthVaries by deck size
Thickness0.25 in.
0.64 cm
Blade tip speedApproximately 18,000 fpm
5,486 m/min
NumberThree
Wheels
Caster wheel typeFlat free
Caster wheels13x6.5-6
Front anti-scalp rollersRH, center, LH
Rear anti-scalp rollersOptional
Dimensions
Length84 in.
213 cm
WidthWith chute down, 74, 86 in.
188, 218 cm
HeightWith ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight1,292 to 1,340 lb
586 to 608 kg

Accessories and Attachments

Lighting

LED beacon light kitLED beacon light kit

This light kit signals to others that the machine is approaching. The light is positioned on top of the canopy or on a rollover protective structure (ROPS). It has a breakaway bracket, so that if struck the light can move out of the way.

LED front work lightsLED front work lights

The front work light kit provides the ability to mow at twilight, increasing productivity hours.

Light-emitting diode (LED) bulbs are used. They provide excellent lighting, efficient use of electricity, and long life.

Includes instructions, two LED lights, and mounting hardware.

Not compatible with Mulch on Demand decks.

Miscellaneous

Beacon light kitBeacon light kit

This light kit signals that unit is approaching. The light is positioned on top of the canopy or on rollover protective structure (ROPS) with a breakaway bracket; this ensures that, if struck, the light will not break but will move out of the way.

Rear hitchRear hitch

The rear hitch acts as a mounting point for rear and tow-behind attachments:

  • The hitch can install directly to the engine shroud of a Z900 without the cast-iron bumper or with the cast-iron bumper installed.
  • Z900 models all have a 400-lb (181-kg) towing capacity.

The jack for the mid-mount mower allows easy access to the underside of the mower for maintenance or blade changing while in the field. The kit contains everything necessary to install the jack onto the front of a mower.

The jack for the mid-mount mower allows easy access to the underside of the mower for maintenance or blade changing while in the field.

Jack kit and jack installedJack kit and jack installed
Jack in storage positionJack in storage position

The front frame member is pre-drilled to accept the optional jack kit and jack:

  • The jack makes servicing the underside of the mower deck more convenient.
  • Placed in the storage position, the jack can be carried on the machine.
    • The jack must be removed when using a material collection system to allow installation of the front ballast weights.

 

NOTE: AE32971 jack is included in the kit. The kit contains everything necessary to install the jack onto the front of a mower.

Sun canopySun canopy

Not compatible with beacon light kit.

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Sun canopy

Order number: LPA11548

Trash receptacle kitTrash receptacle kit
Trash receptacle kit with pick stick and bucketTrash receptacle kit with pick stick and bucket

The trash receptacle kit provides mounting for 5-gal. (19-L) bucket and trash-grabbing apparatus (not included). It enables trash pickup and storage without having to leave the mower seat. 

 

The kit also keeps the bucket out of the way and away from the trim side of mower. The bucket attaches quickly and easily with purchased elastic straps:

  • Strong, long lasting, and will meet a variety of operator needs
  • Saves time - allows the operator to continue mowing while picking up debris
  • No more plastic trash bags hanging from the mower
  • No more shredded paper on the lawn
  • Saves money - accommodates debris that can cause damage to a mower

 

Mulch Kits

Mulch kitMulch kit
Mulch kit shown on Estate ZTrak™ mower deckMulch kit shown on Estate ZTrak™ mower deck

The mulching attachment allows converting the mowers so they can be used to perform the mulching function (grass or leaves) of this system.

The attachment consists of special mulching blades, mulch baffles to direct the clippings into the blade for recutting, and a discharge closure and hardware. The adjustable baffle can be moved to one of five positions to match conditions using the convenient wing nuts.

 

Operating tips when mulching:
  • Mow when the grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height cannot be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals - approximately every four days to five days.
  • Always mow with sharp blades.
Mulch kitMulch kit
Mulch kit shown on Estate ZTrak™ mower deckMulch kit shown on Estate ZTrak™ mower deck

The mulching attachment allows converting the mowers so they can be used to perform the mulching function (grass or leaves) of this system.

The attachment consists of special mulching blades, mulch baffles to direct the clippings into the blade for recutting, and a discharge closure and hardware. The adjustable baffle can be moved to one of five positions to match conditions using the convenient wing nuts.

 

Operating tips when mulching:
  • Mow when the grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height cannot be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals - approximately every four days to five days.
  • Always mow with sharp blades.

Rear Hitch

Rear hitchRear hitch

The rear hitch acts as a mounting point for rear and tow-behind attachments:

  • The hitch can install directly to the engine shroud.
  • Z900 Series ZTraks™ have a 400-lb (181-kg) towing capacity.

Seat

Padded armrests installed on seatPadded armrests installed on seat

The padded armrest kit provides extra comfort for the operator.

NOTE: The padded armrest kit is only compatible with the mechanical suspension seat provided on the ZTrak™ Z740R Mower.

Base seat panBase seat pan
Isolated seat panIsolated seat pan

The field-installed isolated seat kit for the gas Z900 ZTrak Mowers provides operators with an improved ride and reduces operator fatigue when mowing for prolonged periods of time.

 

This is a dealer-installed kit that converts a base seat with no suspension to an isolated seat.

 

It is compatible with all model year 2015 and newer gas Z900 ZTrak Mowers with base seats that have no suspension and a serial number break of (30,000-).

Fully-adjustable, mechanical-suspension seat optionFully-adjustable, mechanical-suspension seat option

The field-installed suspension seat kit provides operators with maximum ride comfort and reduces operator fatigue when mowing for prolonged periods of time. 

This is a dealer-installed kit that converts a base seat with no suspension to a suspension seat.

Spark Arrester

Spark arrester mufflerSpark arrester muffler
Spark arrester muffler screenSpark arrester muffler screen

A spark arrester screen is available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.

 

Includes instructions, a spark arrester screen, and mounting hardware.

Striping Kits

Striping kit - 72 in. (183 cm) shownStriping kit - 72 in. (183 cm) shown
StripesStripes

Striping kits are available for all B, E, M, and R Series Mowers. These kits utilize a rubber flap to achieve the striping effect on lawns. Different types of grass will stripe differently.
 
Striping kits mount behind the deck and can be adjusted for best performance.

Striping kit - 72 in. (183 cm) shownStriping kit - 72 in. (183 cm) shown
StripesStripes

Striping kits are available for all B, E, M, and R Series Mowers. These kits utilize a rubber flap to achieve the striping effect on lawns. Different types of grass will stripe differently.
 
Striping kits mount behind the deck and can be adjusted for best performance.

Reviews

4.4

5 reviews

Rating Snapshot

4
0
0
0
0
3.8
4
4.8

Z950R w/ Tweels Great Machine

5/5

I traded off a 26 year old Deere 265 for this machine when we moved to the country with some acreage. I am now mowing about 6 acres and much of it was rough and took some clearing. This machine is right for the job, the tweels do great on hillsides and the 60 in deck is great for cutting grass fast. Only complaint is the machine is loud, but I will buy again in a minute.

Pros

  • tweels
  • solid front tires
  • heavy blades

Cons

  • loud compared to front engine rider

Alpine17

From: Carthage, MO 64836, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Z950R w/ Tweels Great Machine

5/5

I traded off a 26 year old Deere 265 for this machine when we moved to the country with some acreage. I am now mowing about 6 acres and much of it was rough and took some clearing. This machine is right for the job, the tweels do great on hillsides and the 60 in deck is great for cutting grass fast. Only complaint is the machine is loud, but I will buy again in a minute.

Pros

  • tweels
  • solid front tires
  • heavy blades

Cons

  • loud compared to front engine rider

Alpine17

From: Carthage, MO 64836, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

under 300hrs and major motor issue

5/5

First new John Deere Commercial Mower purchased. High quality for high cost. The 950R is a great machine and has done a great job. Problem is, warranty of 3 years will typcially be expired way before 1500hrs are on the machine. My machine has under yes under 300 hrs. Problem is, it shut off automatically due to low oil. Checked oil, it was just under a quart low. Put proper oil fill in and less than 2 hrs later - mower shut off due to low oil. checked oil - yep, same issue. Oil is not leaking out, some how someway it is being used. I am trusting that John Deere stands behind this issue 100% and does not stick me as the owner after investing 12k into a mower that should last me my life time. Will keep you all posted as to how JD does.

Pros

  • great machine

Cons

  • warranty should be 5 years not 3 years

bubba87

From: Woodburn, IN 46797, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

under 300hrs and major motor issue

5/5

First new John Deere Commercial Mower purchased. High quality for high cost. The 950R is a great machine and has done a great job. Problem is, warranty of 3 years will typcially be expired way before 1500hrs are on the machine. My machine has under yes under 300 hrs. Problem is, it shut off automatically due to low oil. Checked oil, it was just under a quart low. Put proper oil fill in and less than 2 hrs later - mower shut off due to low oil. checked oil - yep, same issue. Oil is not leaking out, some how someway it is being used. I am trusting that John Deere stands behind this issue 100% and does not stick me as the owner after investing 12k into a mower that should last me my life time. Will keep you all posted as to how JD does.

Pros

  • great machine

Cons

  • warranty should be 5 years not 3 years

bubba87

From: Woodburn, IN 46797, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Awesome machine

5/5

Vary high quality cut. Fast machine. The tweels are well worth the money!

Pros

  • it's not how well you mow!

Cons

  • arm rest are to short. needs a vent hole in the fu

BOBZ

From: Iowa, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Great Mower, Very Fast, Output shart on motor failed at 320hrs

2/5

Great mower right up until 320 hours when the out put shaft on the motor broke clean off. Its currently at the local dealer for repair. The mower had one month of warranty remaining. This was my 4th John Deer product in the past several years and the brand and warranty is what made me buy again.

Pros

Cons

JT0303

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

2
2
5

Great Mower, Very Fast, Output shart on motor failed at 320hrs

2/5

Great mower right up until 320 hours when the out put shaft on the motor broke clean off. Its currently at the local dealer for repair. The mower had one month of warranty remaining. This was my 4th John Deer product in the past several years and the brand and warranty is what made me buy again.

Pros

Cons

JT0303

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

2
2
5

old lady friendly

5/5

Foot-operated parking brake easy to depress and release. Hydraulic deck lift and easy to turn deck height adjustment. Adjustable steering levers (lower, further forward) to accommodate shorter folks. Slip-proof step on mower deck finally accepts that *many people were mounting from the mower deck anyway* Seat is very comfortable with three different settings. Mower more powerful and faster than my JD 757. Seems to disperse debris better, too. Love the gas gauge. Not more 'Hi, guess what' calls to homebase for rescue with a gas can! Most of all, much improved design for keeping debris out of the air intakes and the engine. Debris infiltration was a real problem with my old JD 757 and eventually caused its demise this summer. Blowing debris is a particular problem out here in the windy prairies.

Pros

  • gas gauge
  • foot-operated parking brake
  • comfortable 3-way adjustable seat
  • better design to keep debris out of engine
  • hydraulic deck lift

Cons

  • cupholder in awkward location

PrairieCrone

From: Illinois

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

old lady friendly

5/5

Foot-operated parking brake easy to depress and release. Hydraulic deck lift and easy to turn deck height adjustment. Adjustable steering levers (lower, further forward) to accommodate shorter folks. Slip-proof step on mower deck finally accepts that *many people were mounting from the mower deck anyway* Seat is very comfortable with three different settings. Mower more powerful and faster than my JD 757. Seems to disperse debris better, too. Love the gas gauge. Not more 'Hi, guess what' calls to homebase for rescue with a gas can! Most of all, much improved design for keeping debris out of the air intakes and the engine. Debris infiltration was a real problem with my old JD 757 and eventually caused its demise this summer. Blowing debris is a particular problem out here in the windy prairies.

Pros

  • gas gauge
  • foot-operated parking brake
  • comfortable 3-way adjustable seat
  • better design to keep debris out of engine
  • hydraulic deck lift

Cons

  • cupholder in awkward location

PrairieCrone

From: Illinois

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5